Products
Contact
DJ-2
DJ-3
DJ-3USB
DDJ-3USB2
DDJ-300EBT
DDJ-6/DDJ6-EB
DDJ-8USB/DDJ-8USB-EB
DDM-100/DDM-100E
DDM-500FB
MX-30
MX-40
Specifications for DJ-3USB
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 50mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 0.4mV rms sensitivity for 1V output | ||
| 120mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 0.85mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 97dB | |
| Mic: | Better than 89dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x355x99(mm) | |
| Weight: | 4.5 KG | |
| Power Comsumption: | 10.3W with full headphone output |
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 50mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 0.4mV rms sensitivity for 1V output | ||
| 120mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 0.85mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 97dB | |
| Mic: | Better than 89dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x355x99(mm) | |
| Weight: | 4.5Kgs | |
| Power Comsumption: | 10.3W with full headphone output |
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 50mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 0.4mV rms sensitivity for 1V output | ||
| 120mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 0.85mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 97dB | |
| Mic: | Better than 89dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x355x99(mm) | |
| Weight: | 4.5 KG | |
| Power Comsumption: | 10.3W with full headphone output |
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 50mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 0.4mV rms sensitivity for 1V output | ||
| 120mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 0.85mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 97dB | |
| Mic: | Better than 89dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x355x99(mm) | |
| Weight: | 4.5 KG | |
| Power Comsumption: | 10.3W with full headphone output |
| Upcoming... |
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 90mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 1.9mV rms sensitivity for 1V output | ||
| Phono: | 47K ohm input impedance | |
| 1.2mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 96dB | |
| Mic: | Better than 91dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x308x99(mm) | |
| Weight: | 4.0 KG | |
| Power Consumption: | 9.5W with full headphone output | |
| EALA Effect (for DDJ-6EB): | ||
| EALA (3D Surround): | +10dB at 80Hz (single L or R input) | |
| +6dB at 1.5kHz (single L or R input) |
| Inputs: | 2 phono. 4 line, 2 mic |
| Output: | 2 master (balanced and unbalanced), 1 booth via RCA |
| Minimum Input Voltage: | Output at 0 dbV |
| Phono: | 1.1 mV |
| Line: | 74 mV |
| Microphone: | 1.5 mV |
| Output Voltage: | |
| Line: | Max. 6.8 Vrms |
| Headphone: | 0.3W |
| Frequency Range: | +/- 3dB |
| Phono: | RIAA standard +/- 3dB |
| Line: | 20~20kHz +/-3dB |
| Microphone: | 20~18kHz +/- 3dB |
| Distortion: | 0.01% |
| S/N Ratio: | With JIS Weighted |
| Phono: | 82dB |
| Line: | 94dB |
| Microphone: | 95dB |
| Tolkover Attenuation: | -14dB |
| Headphone Impedance : | 30 ohm |
| Tone Control: | dB |
| Treble: | +10/-30 |
| Middle: | +10/-30 |
| Bass: | +10/-30 |
| eala Effect (for DDJ-8USB EB): | |
| eala (3D Surround): | +10dB at 80Hz (single L or R input) |
| +6dB at 1.5kHz (single L or R input) | |
| Bass Effect: | +18dB at 40Hz |
| Dimension (WxDxH): | 320x359x99(mm) |
| Weight: | 5.5kgs |
| Power suppy: | 230V 50Hz |
| Power Comsumption: | 11W (maximum) |
| Inputs: | 2 Phono, 3 Line, 1 Microphone | |
| Line: | 10K ohm input impedance | |
| 90mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 1.9mV rms sensitivity for 1V output | ||
| Phono: | 47K ohm input impedance | |
| 1.2mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | 2 Master (Balanced & Unbalanced), 1 booth via RCA | |
| Line: | 6.8V rms max | |
| Headphone: | 0.3W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 96dB | |
| Mic: | Better than 91dB | |
| Phono: | Better than 82dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-18KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +10/-30dB at 20Hz | |
| Middle: | +10/-30dB at 1.3KHz | |
| Treble: | +10/-30dB at 15KHz | |
| Talkover Attenuation: | -16dB | |
| Dimension(WxDxH): | 254x308x99(mm) | |
| Weight: | 4.0 KG | |
| Power Consumption: | 9.5W with full headphone output | |
| EALA Effect (for DDJ-6EB): | ||
| EALA (3D Surround): | +10dB at 80Hz (single L or R input) | |
| +6dB at 1.5kHz (single L or R input) |
| Upcoming... |
| Inputs: | ||
| Line: | 10K ohm input impedance | |
| 100mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 1.5mV rms sensitivity for 1V output | ||
| 30mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 1.4mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | Line: | 6.8V rms max |
| Headphone: | 0.5W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 93dB | |
| Mic: | Better than 92dB | |
| Phono: | Better than 80dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-15KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +12/-40dB at 20Hz | |
| Middle: | +12/-30dB at 1KHz | |
| Treble: | +12/-30dB at 15KHz | |
| Power Comsumption: | ||
| 19.5W with full headphone output |
| Inputs: | ||
| Line: | 10K ohm input impedance | |
| 100mV rms sensitivity for 1V output | ||
| Mic: | 600 ohm input impedance unbalanced | |
| 1.1mV rms sensitivity for 1V output | ||
| 22mV rms max input | ||
| Phono: | 47Kohm input impedance | |
| 1.5mV rms sensitivity @ 1KHz for 1V output | ||
| Outputs: | Line: | 6.8V rms max |
| Headphone: | 0.5W into 47ohm | |
| Signal to Noise Ratio: (maximum output JIS-A weighted) | ||
| Line: | Better than 93dB | |
| Mic: | Better than 92dB | |
| Phono: | Better than 80dB | |
| Distortion: | Less than 0.01% | |
| Frequency response: | ||
| Line: | 20-20KHz +/-0.5dB | |
| Mic: | 20-15KHz +/-0.5dB | |
| Phono: | +/-1dB except for controlled attenuation of -3dB | |
| @20Hz to reduce rumble and feedback | ||
| Channel Equalizer: | ||
| Bass: | +12/-40dB at 20Hz | |
| Middle: | +12/-30dB at 1KHz | |
| Treble: | +12/-30dB at 15KHz | |
| Power Comsumption: | ||
| 24W with full headphone output |